#1
gday i have an ibanez rg1570,


the action is 2 high and im a bit poor atm, i have adjusted the trus rod mildly as it was slightly bowed in, now it is straight but the action is still a bit higher than i'd like it. There is an allan key screw on either side of the trem (They are the only 2 screws i cant put down to another purpose) Are these screws the ones to raise/lower the action? Or can u not change the height of the bridge on an FL?

Thanks
RG's & Mesa's
#2
"There is an allan key screw on either side of the trem (They are the only 2 screws i cant put down to another purpose) Are these screws the ones to raise/lower the action?"

yes. assuming you're talking about the ones on the 2 studs where the trem knife edge sits.
I'm an idiot and I accidentally clicked the "Remove all subscriptions" button. If it seems like I'm ignoring you, I'm not, I'm just no longer subscribed to the thread. If you quote me or do the @user thing at me, hopefully it'll notify me through my notifications and I'll get back to you.
Quote by K33nbl4d3
I'll have to put the Classic T models on my to-try list. Shame the finish options there are Anachronism Gold, Nuclear Waste and Aged Clown, because in principle the plaintop is right up my alley.

Quote by K33nbl4d3
Presumably because the CCF (Combined Corksniffing Forces) of MLP and Gibson forums would rise up against them, plunging the land into war.

Quote by T00DEEPBLUE
Et tu, br00tz?