#1
Ok, This is part of my very first customization, I want to know how do I properly remove the bridge, I would have just unscrewed it just as it is, but I'm not so sure since the springs on the bottom are there, and I don't want to ruin it by accident.
░░▓▓▓▓▓░░░░░
▓▓▓▓▓▓▓▓▓░░
▓▓▓▓▓░░░░
▓▓▓▓▓▓░░
▓▓▓▓▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓░ It's a-me, Mario!
░░▓▓▓▓▓▓▓░░░

Check out my
Tumblr
Or follow me on Twitter
#4
Just pull them out? just like that?
░░▓▓▓▓▓░░░░░
▓▓▓▓▓▓▓▓▓░░
▓▓▓▓▓░░░░
▓▓▓▓▓▓░░
▓▓▓▓▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓░ It's a-me, Mario!
░░▓▓▓▓▓▓▓░░░

Check out my
Tumblr
Or follow me on Twitter
#5
yep.
Current Gear:
LTD MH-400 with Gotoh GE1996T (EMG 85/60)
PRS SE Custom 24 (Suhr SSH+/SSV)
Ibanez RG3120 Prestige (Dimarzio Titans)
Squier Vintage Modified 70s Jazz V
Audient iD22 interface
Peavey Revalver 4, UAD Friedman BE100/DS40
Adam S3A monitors
Quote by Anonden
You CAN play anything with anything....but some guitars sound right for some things, and not for others. Single coils sound retarded for metal, though those who are apeshit about harpsichord probably beg to differ.
#6
Ok, I took them off, Is there anything i need to know to put them back on?
░░▓▓▓▓▓░░░░░
▓▓▓▓▓▓▓▓▓░░
▓▓▓▓▓░░░░
▓▓▓▓▓▓░░
▓▓▓▓▓▓▓▓
▓▓▓▓▓▓▓▓▓▓▓░ It's a-me, Mario!
░░▓▓▓▓▓▓▓░░░

Check out my
Tumblr
Or follow me on Twitter
#7
use pliers and back the spring claw out about 3/4 distance.
Current Gear:
LTD MH-400 with Gotoh GE1996T (EMG 85/60)
PRS SE Custom 24 (Suhr SSH+/SSV)
Ibanez RG3120 Prestige (Dimarzio Titans)
Squier Vintage Modified 70s Jazz V
Audient iD22 interface
Peavey Revalver 4, UAD Friedman BE100/DS40
Adam S3A monitors
Quote by Anonden
You CAN play anything with anything....but some guitars sound right for some things, and not for others. Single coils sound retarded for metal, though those who are apeshit about harpsichord probably beg to differ.