#1
Hey guys could anyone help me with instructions on how to adjust the settings on the hot plate, i have the 16ohm version, whenever i turn the boost on my GH100L on it starts screaming
Ibanez PGM301 signed by Paul Gilbert
Ibanez PGM 500
Ibanez Fireman custom
Saving for a GH100L/VH100R
Orange PPC212 2X12
#2
It might be that because you've theoretically turned the volume up by quite a lot, you're getting feedback. Try standing further away from the amp.
#3
on the left there is OHM selection which i have set to 16ohm and on the right side there is another dial, does anyone have any experience with this attenuator and how to get the best out of it?
Ibanez PGM301 signed by Paul Gilbert
Ibanez PGM 500
Ibanez Fireman custom
Saving for a GH100L/VH100R
Orange PPC212 2X12
#4
yeah i have the 8ohm version. the 0db-16db only works when you have the attenuation on -16db. from there you can adjust the amount of attenuation you want by using the 0db-16db dial. also forgot to mention you have to raise your amp's master or channel volume meaning you have to eq it right with the hotplate's eq.