#1
My pickups went bad in My bronze series B.C. Rich Warlock. I am not sure on how to remove them and replace them. How would I go about doing that?
#2
What you do is you take it to the nearest guitar shop because you'll probably **** it up if you don't know what your doing.
#3
Pickups do not "go bad".

Something else went bad.

Take it to a shop and ask them to find out what it is and tell them you'll give them money if they fix it.
Actually called Mark!

Quote by TNfootballfan62
People with a duck for their avatar always give good advice.

...it's a seagull

Quote by Dave_Mc
i wanna see a clip of a recto buying some groceries.


stuffmycatswatchontv.tumblr.com
#4
maybe you stuffed up your amp, cord, jack, etc.
To remove them though, depending on what type of guitar you can either with a pickguard, unscrew the pickguard and 'de solder' the wires and then unscrew them from the pickguard.
For pickups mounted into the body. Take the back plate off and de solder the wires, unscrew the pickups and take them out.
To put new ones in, reverse the order^