Page 1 of 3
#1
so if i missed anything or you want something else you better say something quick,

also, people who want someting custom, you guys are on the backburner, no offense, i need to get the basics out of the way first


also, im just going to do a basic outline of the bodys first, upload, then start the detail work. so bare with me please,

well guys i have an idea, and i wanted to know what you guys though about it.

the football season is almost over (i have about 3or4 games left) so im going to have some free time, so i fig i would give back to UG. How? im going to propose i post some accurate CAD templates for anyeone who wants.

its simple, you tell me what body, pickups config, etc and i can do it.
so basically the list will grow depending on what you guys ask for,
i already have iceman, ESP LP, and an esp ganessa done in autocad, all done by me
all pretty accurate,

basically if this idea is good, what i want from you guys is some guitar(and parts) to make templates for. providing a large pic from which i can work with is always a plus.

so anything, a guitar, trem,bridge,pickup,neck, any part of a guitar i can make temp/drawing of. also,, if your wondering how you will print these, i will provide a link for a viewer that you can used to view and print this thing full scale,


lastly im well aware that you can get these files online at some sites. but i dont care,
this way, you get exactly what you want, and if something needs to be changed, im right here to make that change

so thoughts,opinions, suggestions for templates?


This is the first list of templates!

Templates

Guitars
Les pual
Bc rich mockingbird - Done
Sg
Tele
strat
v
explorer
fireman
Washburn CS 780
esp v
esp ex- done
Peavey Rotor EXP
RR
laiho

Bass

jazz
p
sg

Neck
strat 25 ½ Started
strat 25 Started
Lp 24 ¾ Started

Other
Music Man 7
RG7321
JEM 7
RG2228 7


so if i missed anything or you want something else you better say something quick,

also, people who want someting custom, you guys are on the backburner, no offense, i need to get the basics out of the way first


also, im just going to do a basic outline of the bodys first, upload, then start the detail work. so bare with me please,
Just call me Bobby
Member of the official GB&C "Who to Listen to" list
Quote by mikeyElite
you build guitars worthy of sexual favors

Quote by Invader Jim
if this party gets any livelier a funeral is gonna break out.
Last edited by metalwarrior40 at Oct 17, 2008,
#2
Good idea my friend.
I don't have any suggestions--but it's definetely a good idea.
#3
^ thanks, i fig it would end all the threads of people asking for temps,

if im lucky i'll get it stickied eventually when it gets big enough
Just call me Bobby
Member of the official GB&C "Who to Listen to" list
Quote by mikeyElite
you build guitars worthy of sexual favors

Quote by Invader Jim
if this party gets any livelier a funeral is gonna break out.
#4
^
That would be nice.
I could use the template for the LP actually come to think of it.
If I can print it off full size easily, I'd be quite pleased.
#5
BC rich Mockingbird-shaped guitar. The first guitar i make will be one of these..... I just need some free time and money.
Schecter Gryphon; Ibanez AEG20E
Peavey Rage 158 ; TRAYNOR YCS50
EHX Big Muff Pi; Dunlop CryBaby GCB-95 (modded); MXR M-108 10-band; DigiTech JamMan Looper
#6
Quote by Duval67
^
That would be nice.
I could use the template for the LP actually come to think of it.
If I can print it off full size easily, I'd be quite pleased.



well the first ones im going to do are a Gibson LP, normal strat, tele, and sg
since there the more common ones

also im doing 25 1/2, 25, and 24 3/4" necks too

those are the first things on the list

EDIT: also yea it will be easy, simpley open program,load file, hit print, scale setting=1:1 , print, wow thats 5 clicks haha, cant make it much easier
Just call me Bobby
Member of the official GB&C "Who to Listen to" list
Quote by mikeyElite
you build guitars worthy of sexual favors

Quote by Invader Jim
if this party gets any livelier a funeral is gonna break out.
#7
Necks :O
Yay.
Do you think, by any chance you could do a Gibson LP with a 25 1/2 inch scale neck?
Pretty please?
#8
Quote by Duval67
Necks :O
Yay.
Do you think, by any chance you could do a Gibson LP with a 25 1/2 inch scale neck?
Pretty please?

yes sirr haha, its simple really, once i get the shapes done, and the necks done,
its just a matter of copy and paste, no big deal
Just call me Bobby
Member of the official GB&C "Who to Listen to" list
Quote by mikeyElite
you build guitars worthy of sexual favors

Quote by Invader Jim
if this party gets any livelier a funeral is gonna break out.
#9
maybe you should do one for a generic bass too (idk, jazz or a P, or something common)
#10
sounds good, i dont play bass, so i dont know what common bodys are, (give me 3 or so i guess)
Just call me Bobby
Member of the official GB&C "Who to Listen to" list
Quote by mikeyElite
you build guitars worthy of sexual favors

Quote by Invader Jim
if this party gets any livelier a funeral is gonna break out.
#11
Quote by metalwarrior40
yes sirr haha, its simple really, once i get the shapes done, and the necks done,
its just a matter of copy and paste, no big deal

Good stuff!
Looking forward to the start of all this. Should be good.
#13
I would love this!

By the way, I have a schematic of a strat neck, sitting around on my computer. if you need it for reference or anything.
Enjoi <--- Friend me
Quote by Scowmoo
Otter, you're my new god.
#14
i've got a ton of templates... strat, tele, rg, explorer, f-100, sg, lp, lp dc, prs, flying v, a king v that i made myself...i forget what else. all .DXF ;D
Support your local luthier!

Timpson Guitars and TDM Pickups rock ;D

I make guitars and pickups. I also make sh*t that'll blow you the f*k up as well as things that will rebuild you - I have the technology
Last edited by nuthinbuttrubl8 at Oct 13, 2008,
#15
I'm not really sure what you're talking about. What is this a template for, what's it's use to me?
We've drained full confession booths, polluted drinking wells with our repentances, and then stood grinning with our arms around the shoulder of a rotting child.



If you resist change, you will be here forever.
#16
Quote by Øttər
I would love this!

By the way, I have a schematic of a strat neck, sitting around on my computer. if you need it for reference or anything.


i would love that, PM me please,

look at it this way guys, the more pics and info i get, the faster i can pump this stuff out, (pluss it always help when i have class 90 mintues a day working on autocad )
Just call me Bobby
Member of the official GB&C "Who to Listen to" list
Quote by mikeyElite
you build guitars worthy of sexual favors

Quote by Invader Jim
if this party gets any livelier a funeral is gonna break out.
#17
Dude, if you could do a 50's lp neck with a fender esque headstock you'd be my ****ing hero
We've dressed up in our best...

...and are prepared to go down like gentlemen.

Quote by bogg808
The PBT is for those too TGP for the rest of UG.

#18
So your just looking for some cad files of guitar plans? If so I have a bunch of them.
#19
Fireman (upside down Ibanez Iceman designed by Paul Gilbert) 7 string neck through body, 25 1/2 scale, H H pups, 2 volume controls, 2 tone controls, 3 way selector switch, fixed bridge string through body
... to be specific
just need the time, money, and tools
yeah, i've been thinkin about this for a while

Edit: somthin like this
Attachments:
fireman.JPG
Warning: The above post may contain lethal levels of radiation, sharp objects and sexiness.
Proceed with extreme caution!
Last edited by justinb904 at Nov 7, 2008,
#20
ok so where are we gonna share all these? is that the purpose of this thread?
Support your local luthier!

Timpson Guitars and TDM Pickups rock ;D

I make guitars and pickups. I also make sh*t that'll blow you the f*k up as well as things that will rebuild you - I have the technology
#21
well im planning on linking all these to a flie sharing site(not sure which yet)
so people can download them as they please. i would simply edit the first post each time one got done, and link it, simpful enough.


also 420 freak- no im not looking for files, im making these all my self, unless others pitch in.
Just call me Bobby
Member of the official GB&C "Who to Listen to" list
Quote by mikeyElite
you build guitars worthy of sexual favors

Quote by Invader Jim
if this party gets any livelier a funeral is gonna break out.
#23
Quote by Invader Jim
Don't lump all templates in one file, though. I have dial-up. .......

Really?
That's unfortunate.
For this man's sake, be nice about the lumping of files. I have dialup at my dad's and it is truly unpleasant.
#24
Quote by Invader Jim
Don't lump all templates in one file, though. I have dial-up. .......



i know you do jim

thats why, im doing each file seperate, which means you only have to take what you want,

of course, im also going to do "packs" as in all strat plans, all LP plans etc. in each pack
Just call me Bobby
Member of the official GB&C "Who to Listen to" list
Quote by mikeyElite
you build guitars worthy of sexual favors

Quote by Invader Jim
if this party gets any livelier a funeral is gonna break out.
#26
Washburn CS 780
Then there's this band called Slice The Cake...

Bunch of faggots putting random riffs together and calling it "progressive" deathcore.
Stupid name.
Probably picked "for teh lulz"

Mod in UG's Official Gain Whores
#27
Quote by derekwalden_-33
I would super enjoy an SG body, with a bass bridge and Jazz bass pickup.

I will love you. Forever.



congrats, you get the award of the first bass body i do.

is an SG bass body the same dimensions as a normal sg, or are they diff?

please explain if not,
Just call me Bobby
Member of the official GB&C "Who to Listen to" list
Quote by mikeyElite
you build guitars worthy of sexual favors

Quote by Invader Jim
if this party gets any livelier a funeral is gonna break out.
#30
Quote by derekwalden_-33
Yeah, same size.

I LOVE you. *Finds condom to bone your leg with*
Im sorry



ahaha. and yea thats sweet, i can knock out a guitar and bass with one pic

well guys i got some work to do, i should have the first batch of what i can up this weekend. if not next week., feel free to add more suggestions!


yes im having fun with the smilys, im quite bored
Just call me Bobby
Member of the official GB&C "Who to Listen to" list
Quote by mikeyElite
you build guitars worthy of sexual favors

Quote by Invader Jim
if this party gets any livelier a funeral is gonna break out.
#31
Quote by derekwalden_-33
Oh yes, In case your wondering, 34" scale, yada yada. I can give you info on anything ya need.



double post i know, sorry

anways PM with as much specs as you can give me please, would help the process quite a bit (otherwise i have to search the internet and hope that its right) which can take hoursssss
Just call me Bobby
Member of the official GB&C "Who to Listen to" list
Quote by mikeyElite
you build guitars worthy of sexual favors

Quote by Invader Jim
if this party gets any livelier a funeral is gonna break out.
#32
Haha okay, so! my suggestion with specifics.
LP with 25 1/2 scale.
Bolt on.
24 frets.
Humbuckers in bridge and neck.
T-O-M bridge.
Thankyou sir!
#33
Quote by metalwarrior40
i know you do jim

thats why, im doing each file seperate, which means you only have to take what you want,

of course, im also going to do "packs" as in all strat plans, all LP plans etc. in each pack

Thank you very much, man.

*kisses metalwarrior40's ass*
#34
dialup?! wtf?
Support your local luthier!

Timpson Guitars and TDM Pickups rock ;D

I make guitars and pickups. I also make sh*t that'll blow you the f*k up as well as things that will rebuild you - I have the technology
#36
Quote by Invader Jim
Thank you very much, man.

*kisses metalwarrior40's ass*



well you got sigged there

haha anyways i know you do, i read about you complaing about it all the time.
i understand, i had dialup from the age of 5 till now, ive only had highspeed for about 7 months.
Just call me Bobby
Member of the official GB&C "Who to Listen to" list
Quote by mikeyElite
you build guitars worthy of sexual favors

Quote by Invader Jim
if this party gets any livelier a funeral is gonna break out.
#37
Quote by nuthinbuttrubl8
dialup?! wtf?

Yeah, it's where your computer has something called a MODEM and it has to dial the ISP's phone number. It takes awhile to connect, but when you finally do, you can magically access any other computer in the world via this thing called the INTERNET. It's crazy what they can do with technology these days.
#38
Quote by Invader Jim
Yeah, it's where your computer has something called a MODEM and it has to dial the ISP's phone number. It takes awhile to connect, but when you finally do, you can magically access any other computer in the world via this thing called the INTERNET. It's crazy what they can do with technology these days.



it sucks,

also i think i just helped jack my own thread

TEMPLATES YES TEMPLATES...
AS WE WERE SAYING
Just call me Bobby
Member of the official GB&C "Who to Listen to" list
Quote by mikeyElite
you build guitars worthy of sexual favors

Quote by Invader Jim
if this party gets any livelier a funeral is gonna break out.
#39
Yeeeessss.... templates.... *shifty eyes*

ESP V and EX shapes.
Then there's this band called Slice The Cake...

Bunch of faggots putting random riffs together and calling it "progressive" deathcore.
Stupid name.
Probably picked "for teh lulz"

Mod in UG's Official Gain Whores
Page 1 of 3