#1
so im gunna start putting stuff together and make my own talkbox.

ive found a great diagram to use and it has step by step instructions....

http://www.blamepro.com/talkboxG.htm

i have found a few parts but dont know where to look for the rest???

also if you have a wiring chart of this...i would be much appreciated..

im a noob at this stuff

Parts List:

footswitch: http://www.newoldsounds.com/index.php?main_page=product_info&products_id=800

mono jacks: http://yhst-50206111187217.stores.yahoo.net/swst1moja.html

vinyl tubing ill find at ace hardware or somthing like that

horn driver: (would this be suitable) http://www.partsexpress.com/pe/showdetl.cfm?Partnumber=260-097

for the speaker cable how about this? http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=100-050

and for the enclosure..no clue where to buy pedal enclosures....

all help is appreciated!
Last edited by AJS19 at Oct 13, 2008,
#5
I am also kind of new to this stuff, And wht I planned on doing is getting a small no-name-brand-amp for around $20 and removing the speaker and replacing it with a horn driver, then, running my guitar thru that and pluging a mic into my good amp, I was wondering if anyone has ever tried something similar, or knows why it won't work...
#6
^

I have done that with fairly average results. It worked for the most part but I think the low wattage nature of a small amp did it no good. I also believe my tube diameter was too small.

I have never been game enough to plug my AC30 into the horn driver...
#7
well Im Trying to build it "budget" so fairly average sounds great to me...
thanks for the input...