#1
Well, upon receiving an alumitone pickup and attempting to wire it up I ended up with a bunch of loose wires, broken pots, and a guitar that wasn't working. My guitar is an ibanez szr720, they have 2 humbuckers, 2 volume, and 1 tone with a 3 way switch. I'm having trouble rewiring it to working order, mainly because i can't seem to find a wiring diagram. The switch has 3 rows of 4 connection points, most diagrams that I'm finding show a simpler switch. I'm new to putting pickups in, however i'm fairly capable with a soldering iron and would like to fix and maintain my guitar. Any help is greatly appreciated.
#2
ground the green and the black & White wires to the back of the volume pot. Then look at the lug on the switch were the other pickup is wired. You can pretty much use your other pickup as a wiring diagram if you understand me?
#3
do not ground the green and the black & White wires to the back of the volume pot.
do not use your other pickup as a wiring diagram.
the two pickups are wired differently because one of the magnets is flipped.
these pickups don't use Seymour Duncan colour codes.

Meadows
Quote by Jackal58
I release my inner liberal every morning when I take a shit.
Quote by SK8RDUDE411
I wont be like those jerks who dedicate their beliefs to logic and reaosn.
#4
i wasn't using seymour duncan colour codes....

this. Use the wiring diagram above with that pickup....