#1
I've used the search bar, and have found nothing very helpful. Whenever I use my wah, and I'm moving over to the treble side, the tone becomes very scratchy and I can hardly stand it. I've heard great things about these wahs and I don't want to trade it for something else, so other suggestions would be nice. Thanks guys.
Traynor YCV40
Modded Gibson SG
Gibson CS-356
1973 Fender Bassman
Fulltone OCD
MXR Carbon Copy Delay
#2
You don't like how it sounds, but you don't want to get something different? Sounds like you don't like the high end on the wah is all, either don't pretty the wah down all the way, adjust the throw on it so it doesn't go as high (check the wah modding thread to know what I'm talking about). You could also try lowering the treble on your amp.
I don't give a shit if you listen to me or not
#3
I don't like the scratchiness and crackling it gets when it sweeps, not the wah itself. Is there any way I could fix this?
Traynor YCV40
Modded Gibson SG
Gibson CS-356
1973 Fender Bassman
Fulltone OCD
MXR Carbon Copy Delay
#4
Sounds like a scratchy pot.


Use some contact cleaner to fix that.
Mitch Hedberg Group
http://groups.ultimate-guitar.com/koalabears/

Quote by Irnmaiden4life
why didnt you just play like crap?
if you need help with that, ask Vincent745



Quote by imgooley
Awe, so cute...

How old are you?



Quote by H4T3BR33D3R


Old enough to yell rape.
#5
yeah i have the same problem. it's a pain in the ass, but if you can get some contact cleaner... apply that shit man.
Gibson SG Standard + 18volt EMG-81 & 85
Mesa/Boogie Mark IV + Recto 2x12
Keeley Modded BD-2
Vox V847a
Quote by one vision
Bureaucrats gonna crat.

Recognised by the Official EG/GG&A Who To Listen To List 2008
#6
Ok thanks a lot dudes, I'll hop on that shit.
Traynor YCV40
Modded Gibson SG
Gibson CS-356
1973 Fender Bassman
Fulltone OCD
MXR Carbon Copy Delay
#7
Where might I obtain said cleaner?
Traynor YCV40
Modded Gibson SG
Gibson CS-356
1973 Fender Bassman
Fulltone OCD
MXR Carbon Copy Delay
#8
any hardware store with some sort of electrical section. just ask them where the contact cleaner is.
Gibson SG Standard + 18volt EMG-81 & 85
Mesa/Boogie Mark IV + Recto 2x12
Keeley Modded BD-2
Vox V847a
Quote by one vision
Bureaucrats gonna crat.

Recognised by the Official EG/GG&A Who To Listen To List 2008
#9
This:

Quote by UnsignedRecords
yeah i have the same problem. it's a pain in the ass, but if you can get some contact cleaner... apply that shit man.


+ This:

Quote by SRVspeaks
Ok thanks a lot dudes, I'll hop on that shit.


=

I have a similar problem with my 847 on occasion too, think I'll have to get some of that contact cleaner (shit) and fix it. If I wasn't so lazy.