#1
Are Carvin V3's biased for 6L6 power tubes right out of the box or do you have to take it to a tech and have him bias it? Just wondering cuz on the Carvin website it just says that the amp comes with EL34s.
#2
I didnt think you could use 6V6s in an EL34/84 amp. But I suggest you take it to a tech just in case.
#3
Quote by qotsa1998
I didnt think you could use 6V6s in an EL34/84 amp. But I suggest you take it to a tech just in case.



He's not trying to use 6V6, the amp is El34/6L6 switchable.
Baron K2 SE 120
MILLS 4x12 Afterburner
Eventide TimeFactor Delays
ISP Pro Rack G Noise Suppressor
BKP Warpig pickups
#5
It probably has a bias select switch, when you put the 6l6s in just flip that switch to 6l6.
I don't give a shit if you listen to me or not
#8
The switch just sets the bias range, you'll still need to bias it. I would advise against changing the tubes so soon after you get it. Play with it a while and get used to it before you start swapping.