#1
Hi, i was wondering if anyone could help me with a simple setup. I just want a volume knob and a single humbucker. I have an epiphone humbucker i took out of my sg. The sticker says HOTCH(G) LP: BRIDGE BHK if that helps. It has a single wire coming out of it, i stripped it, and inside are only little silver wires. A wiring diagram would help, thanks
#3
Quote by guarana
Hi, i was wondering if anyone could help me with a simple setup. I just want a volume knob and a single humbucker. I have an epiphone humbucker i took out of my sg. The sticker says HOTCH(G) LP: BRIDGE BHK if that helps. It has a single wire coming out of it, i stripped it, and inside are only little silver wires. A wiring diagram would help, thanks
That's shielded cable.

the inside wire is one connection. the shield on the outside is the other connection.

Most of the wiring diagrams on the SD site will just confuse you, because they use 4 wire + shield pickups.


Your Epiphone pickup can be wired the same way as a SD Phat Cat.

Just use this diagram:

Meadows
Quote by Jackal58
I release my inner liberal every morning when I take a shit.
Quote by SK8RDUDE411
I wont be like those jerks who dedicate their beliefs to logic and reaosn.