#1
So, I bought a used EMG 81 and a EMG 60 and i didn't got a capicator with it.
My question is, what kind of capicator is used in the EMG actives?
I know it's a 1 mikro farad one (1uF) but there are loads of different capicators out there :O like ceramic caps and SMD-caps... Im lost guys and need your help.
What is the best possible capicitator to be used with EMG PUs?
#2
Quote by Tusken91
So, I bought a used EMG 81 and a EMG 60 and i didn't got a capicator with it.
My question is, what kind of capicator is used in the EMG actives?
I know it's a 1 mikro farad one (1uF) but there are loads of different capicators out there :O like ceramic caps and SMD-caps... Im lost guys and need your help.
What is the best possible capicitator to be used with EMG PUs?
actually, it isn't.

EMG uses a 0.1 microFarad capacitor.
They supply a Polyester Film cap with their pickups, when new.
Meadows
Quote by Jackal58
I release my inner liberal every morning when I take a shit.
Quote by SK8RDUDE411
I wont be like those jerks who dedicate their beliefs to logic and reaosn.
#4
Okay, found a correct one but now im lost on those percent and voltage thingys...
Wich one of those two are to prefer?


Poly 100nF 630V 22.5mm

or

ECQB poly 100nF 50V 5% 5mm
Last edited by Tusken91 at Nov 9, 2008,
#5
Quote by Tusken91
Okay, found a correct one but now im lost on those percent and voltage thingys...
You think this cap would work? http://www.electrokit.se/index.php
your link just goes to an index, not a specific part.
Meadows
Quote by Jackal58
I release my inner liberal every morning when I take a shit.
Quote by SK8RDUDE411
I wont be like those jerks who dedicate their beliefs to logic and reaosn.
#7
either of those will work just fine.

i'd use the second one, because it will be physically smaller. probably less expensive, too.
Meadows
Quote by Jackal58
I release my inner liberal every morning when I take a shit.
Quote by SK8RDUDE411
I wont be like those jerks who dedicate their beliefs to logic and reaosn.