A **guitar pick** (or **plectrum**) is small flat tool used to pluck or strum strings of a guitar. | |
Picks are generally made of one uniform material — such as some kind of plastic, rubber, felt, tortoiseshell, wood, metal, glass, tagua, or stone. They are often shaped in an acute isosceles triangle with the two equal corners rounded and the third corner sharper. They are used to strum chords or to sound individual notes on a guitar. | |
+ | |
 | |
+ | |
*Various guitar picks. Clockwise from top: A standard nylon pick; An imitation tortoise-shell pick; A plastic pick with high friction coating (black areas); A stainless steel pick; A pick approximating a Reuleaux triangle; and a Tortex "shark's fin" pick* | |
+ | |
## History | |
- | Musicians have used plectrums to play stringed instruments since their appearance. Feather quills were likely the first standardized plectra and became widely used until the late 19th century. At that point, the shift towards what became the superior plectrum material took place; the outer shell casing of an Atlantic hawksbill sea turtle, which would colloquially be referred to as tortoiseshell. <ref>Other alternatives had come and gone, but tortoiseshell provided the best combination of tonal sound and physical flexibility for plucking a string.{{cite 1 Bouchard, Brian. Pick Collecting Quarterly.|url="pickcollecting.presspublisher.us/issue/summer-2010/article/tortoise-shell-guitar-picks"|title="Tortoise Shell Guitar Picks."}}</ref> |
+ | |
+ | Musicians have used plectrums to play stringed instruments since their appearance. Feather quills were likely the first standardized plectra and became widely used until the late 19th century. At that point, the shift towards what became the superior plectrum material took place; the outer shell casing of an Atlantic hawksbill sea turtle, which would colloquially be referred to as tortoiseshell. <ref>Other alternatives had come and gone, but tortoiseshell provided the best combination of tonal sound and physical flexibility for plucking a string. {{cite Bouchard, Brian. Pick Collecting Quarterly.|url="pickcollecting.presspublisher.us/issue/summer-2010/article/tortoise-shell-guitar-picks"|title="Tortoise Shell Guitar Picks."}}</ref> |
+ | |
Prior to the 1920s most guitar players used thumb and finger picks, when looking for something to play their guitar with, but with the rise of musician [[Nick Lucas]], the use of a flat "plectrum style guitar pick" became popular. | |
There have been many innovations in the design of the guitar pick. Most of these were born out of the issue of guitar picks slipping and flying out of the hand of the player. In 1896, Frederick Wahl affixed two rubber disks to either side of a mandolin pick, which made it the first successful solution to the problem. Over the next two decades, more innovations were made, such as corrugating the rounded surface of the pick or drilling a hole through the center to fit the pad of a player's thumb. A more notable improvement was adding the cork to the wide part of the pick, a solution first patented by Richard Carpenter and Thomas Towner of Oakland in 1917. Some of these new designs made picks undesirably expensive. Eventually, pickers realized that all they needed was something to sink their fingerprints into so the pick wouldn't slip, such as a high relief imprinted logo. Celluloid was a material on which this could easily be done. | |
Tony D'Andrea was one of the first people to use celluloid to produce and sell guitar picks. In 1902 he came upon a sidewalk sale offering some sheets of tortoiseshell-colored cellulose nitrate plastic and dies, and finally, he would discover that the small pieces of celluloid he punched out with the dies were ideal for picking. From the 1920s through the 1950s, D'Andrea Manufacturing would control the world's international pick market, providing to major businesses such as Gibson, Fender, and Martin. One of the main reasons celluloid was so popular as guitar pick material was that it was very close to the sound and flexibility of a tortoise shell guitar pick. Celluloid provided a good alternative in many ways. Tortoise shell was rare, expensive, and had a tendency to break. Celluloid was made from cellulose, one of the most abundant raw materials in the world, and nitrocellulose combined with camphor under heat and pressure produced celluloid. Though originally meant as a replacement for ivory billiard balls, celluloid began being used for many things for its flexibility, durability, and relative inexpensiveness, making it a natural candidate as a material for guitar picks. | |
+ | |
<ref>The practice of using Hawksbill turtles for their shells would become illegal in 1973 as a provision of the Convention of International Trade in Endangered Species of Wild Fauna and Flora (CITES), forcing musicians to find something else. {{cite Bouchard, Brian. Pick Collecting Quarterly.|url="pickcollecting.presspublisher.us/issue/summer-2010/article/tortoise-shell-guitar-picks"|title="Tortoise Shell Guitar Picks."}}</ref> | |
## Sound | |
+ | |
Playing guitar with a pick generates a bright sound compared to plucking with the fingertip. Picks also offer a greater contrast in tone across different plucking locations; for example, the difference in brightness between plucking close to the bridge and close to the neck is much greater when using a pick compared to a fingertip. Conversely, the many playing techniques that involve the fingers, such as those found in [[fingerstyle guitar]], slapping, [[classical guitar]], and [[flamenco guitar]], can also yield an extremely broad variety of tones. | |
## Thickness | |
+ | |
Generally, a heavier pick produces a darker sound than a lighter pick, but the shape of the tip has the most influence on the sound. A pointed tip produces a brighter, more focused sound, while a rounded tip produces a rounder, less defined sound. | |
Pick manufacturers print the thickness in millimeters or thousandths of an inch on the pick. Some brands use a system of letters or text designations to indicate thickness. Approximate guidelines to thickness ranges: | |
+ **Heavy/thick** are 0.85–1.20 mm (0.035–0.047 inches) and marked as "H" or "Heavy" | |
+ **Extra heavy/thick** are thicker than 1.50 mm (0.060 inches) and marked as "XH" or "Extra Heavy" | |
## Technique | |
+ | |
Picks are usually gripped with two fingers (thumb and index) and are played with the pointed end facing the strings. However, it's a matter of personal preference and many notable musicians use different grips. E.g., Eddie Van Halen holds the pick between his thumb and middle finger (leaving his first finger free for his tapping technique); James Hetfield, Jeff Hanneman and Steve Morse hold a pick using 3 fingers (thumb, middle and index); Pat Metheny and The Edge also hold their picks with three fingers but play using the rounded side of the plectrum. George Lynch also uses the rounded side of the pick. Stevie Ray Vaughan also played with the rounded edge of the pick, citing the fact that the edge allowed more string attack than the tip. | |
The motion of the pick against the string is also a personal choice. George Benson and Dave Mustaine, for example, hold the pick very stiffly between the thumb and index finger, locking the thumb joint and striking with the surface of the pick nearly parallel to the string, for a very positive, articulate, consistent tone. Other guitarists have developed a technique known as [[circle picking]], where the thumb joint is bent on the downstroke, and straightened on the upstroke, causing the tip of the pick to move in a circular pattern, which can allow speed and fluidity. The angle of the pick against the string is also very personal and has a broad range of effects on tone and articulation. Many rock guitarists use a flourish (called a pick slide or pick scrape) that involves scraping the pick along the length of a round wound string (a round wound string is a string with a coil of round wire wrapped around the outside, used for the heaviest three or four strings on a guitar). The first use of the pick slide is attributed to Bo Diddley and can be heard in the opening of his song "Road Runner." | |
The two chief approaches to fast picking are [[alternate picking]] and [[economy picking]]. | |
## Materials | |
+ | |
### Plastics | |
+ | |
Most common mass-manufactured picks are made out of various types of plastic. Most popular plastics include: | |
+ Celluloid. Historically, this was the first plastic ever used to produce picks, and it is still of some use today, especially for guitarists aiming for vintage tone. | |
+ Nylon. A popular material, it has a smooth and slick surface, so most manufacturers add a high-friction coating to nylon picks to make them easier to grip. Nylon is flexible and can be produced in very thin sheets. Most thin and extra-thin picks are made out of nylon. However, nylon loses its flexibility after 1–2 months of extensive use, becomes fragile and breaks. | |
### Metal | |
Example of a brass guitar pick handcrafted by artisan picksmith Dustin Michael Headrick of Master Artisan Guitar Picks and Nashville Picks. | |
- | Picks made from various metals produce a harmonically richer sound than plastic, and change the sound of the acoustic and electric guitar.[15] Some metal picks are even made from coins, which give players a unique tone as the alloys used in various coinage from around the world vary greatly. Playing guitar with a silver pick gives a unique, rich and bright sound, very different from normal plectrums (Brian May of Queen often plays with a silver sixpence). Picksmiths such as Master Artisan Guitar Picks are widely recognized for handcrafting metal guitar picks from coins and antique metals. |
+ | |
+ | Picks made from various metals produce a harmonically richer sound than plastic, and change the sound of the acoustic and electric guitar. Some metal picks are even made from coins, which give players a unique tone as the alloys used in various coinage from around the world vary greatly. Playing guitar with a silver pick gives a unique, rich and bright sound, very different from normal plectrums (Brian May of Queen often plays with a silver sixpence). Picksmiths such as Master Artisan Guitar Picks are widely recognized for handcrafting metal guitar picks from coins and antique metals. |
### Wood | |
+ | |
Each guitar pick made of wood has its own unique properties and signature sound as a result of differences in density, hardness, and cellular structure. Most wood picks produce a warmer tone than plastics or metals. To withstand the rigors of picking and strumming only the hardest woods are used for picks — including hardwoods like African Blackwood, Bocote, Cocobolo, Lignum vitae, Rosewood, and Zebrawood. While the thick and sometimes rough edge of a wooden pick may create a fair amount of drag at first, wooden picks are generally easy to break in and may even do so quicker than plastic picks. After a couple of hundred strokes, the metal guitar strings wear down the edge and create a smoother pass over the strings. | |
### Glass | |
+ | |
Glass is relatively hard and heavy in comparison to metal or plastic and therefore produces a greater range of tone than other materials. Glass can be polished to a smooth or rough texture depending on the grit of sandpaper used. Likewise, factors such as size, shape, and weight have a much more dramatic effect on the overall tone making each individual glass pick sound and feel unique. | |
### Other | |
+ | |
+ Agate picks range in thickness from 1mm (very rare) up to 5mm, and are extremely inflexible. As they are harder than the metal guitar strings, they resonate the strings more completely. | |
+ Carbon Fiber is also used by PickHeaven, Dunlop and RJL guitars to make guitar picks. These picks are extremely durable and have an extremely high stiffness-to-weight ratio. The world's thinnest guitar pick is made from carbon fiber and has a thickness of 0.2 mm | |
+ Felt picks are mainly used with the ukulele. | |
+ New Tortis is an alternative to natural tortoise, made of polymerized animal protein. It is hard, smooth, thick, and has only slight tip flexibility. | |
+ Tagua is a nut from South America grown on a Tagua Palm Tree. They have similar properties to animal ivory so it's also known as Vegetable Ivory. Tagua produces a very smooth clear tone as the material slides off the strings easily. Tagua guitar picks are generally hand made. | |
+ Polyamide-imide is a material often used in aerospace applications as replacement for metallic alloys. Picks made of this material have low friction on the strings and high durability. | |
## Shapes | |
+ | |
Some picks have small protrusions to make them easier to keep hold if the fingers start to sweat, which is very common on stage due to the hot lights. Some picks have a high-friction coating to help the player hold on to them. The small perforations in the stainless steel pick serve the same function. Players often have spare picks attached to a microphone stand or slotted in the guitar's pickguard. | |
The **equilateral pick** can be easier for beginners to hold and use since each corner may be used as a playing edge. | |
The **shark's fin pick** can be used in two ways: normally, employing the blunt end; or the small perturbations can be raked across the strings producing a much fuller chord, or used to apply a "pick scrape" down the strings producing a very harsh, scratching noise. | |
The **sharp-edged pick** is used to create an easier motion[citation needed] of picking across the strings. | |
- | A **fingerpick** is a type of plectrum used most commonly for playing bluegrass style banjo music. Most fingerpicks are composed of metal or plastic. Unlike flat guitar picks, which are held between the thumb and finger and used one at a time, fingerpicks clip onto or wrap around the end of the fingers and thumb; thus one hand can pick several strings at once. Generally, three are used: one for the thumb, and one each for the middle and index fingers. Fingerpicks worn on the thumb are generally called "thumb picks". Most players use a plastic thumb pick while using metal fingerpicks. Fingerpicks are also used by guitar, Hawaiian guitar, lap steel, autoharp, pedal steel guitar and Dobro players. Fingerpicks generally take quite some time to adapt to, even for people who come from the more common (bare fingers with or without fingernails) fingerstyle techniques. Tone wise, they are the most similar to standard guitar picks. Classical guitar players, who traditionally use their fingernails to pluck the guitar's strings, may choose to use finger picks as an alternative to maintaining fingernails. |
+ | A **fingerpick** is a type of plectrum used most commonly for playing bluegrass style banjo music. Most fingerpicks are composed of metal or plastic. Unlike flat guitar picks, which are held between the thumb and finger and used one at a time, fingerpicks clip onto or wrap around the end of the fingers and thumb; thus one hand can pick several strings at once. Generally, three are used: one for the thumb, and one each for the middle and index fingers. Fingerpicks worn on the thumb are generally called "thumb picks". Most players use a plastic thumb pick while using metal fingerpicks. Fingerpicks are also used by guitar, Hawaiian guitar, lap steel, autoharp, pedal steel guitar and Dobro players. Fingerpicks generally take quite some time to adapt to, even for people who come from the more common (bare fingers with or without fingernails) fingerstyle techniques. Tonewise, they are the most similar to standard guitar picks. Classical guitar players, who traditionally use their fingernails to pluck the guitar's strings, may choose to use finger picks as an alternative to maintaining fingernails. |
+ | |
 | |
+ | |
*Different types of finger picks.* |